How to Secure Labubu

If your Labubu is riding on a bag strap (or dangling from a phone) and you’ve noticed it slipping, twisting, or showing up turned around, you’re not alone. The good news: most of this comes down to picking a better attachment point, using a couple routing tricks, and (if you want) adding a little extra grip to reduce the chances of theft or losing it.

Below is a decision-based guide based on where you’re attaching your Labubu: strap, buckle/loop, or phone.

Choose the right attachment point on your bag (strap, buckle, or loop)

Before you touch the keyring, look at your bag and choose the spot that lets your charm hang with the most stability.

Strap (best for everyday carry)

Use the strap if:

• it’s thick enough that the charm won’t slip off easily
• you don’t mind adjusting it now and then
• you want your Labubu where you can see it

Watch out for:

• thin straps (Labubu can work its way around them)
• loose strap rings or dangling fabric loops that shift a lot

Buckle or handle loop (best for “hold position”)

Use a buckle area or a more fixed handle loop if:

• you want the charm to sit in one place more consistently
• you hate when it turns to the side

Watch out for:

• sharp edges on metal parts (try to keep hardware from rubbing the charm or your bag)

Bag hardware loop (often easiest for routing)

If your bag has a loop meant for keys or small clips, it’s usually the easiest place to route a fabric loop through so the keyring sits the way you want.

Quick rule of thumb

If your charm keeps rotating, switch to a more stable attachment point first. Getting the orientation right is easier when the anchor doesn’t move.

Secure Labubu using the keyring + fabric loop (step-by-step)

This is the most common setup, and it works best when the routing and orientation are done in the right order.

Follow these steps:

1. Open up the fabric loop attached to your Labubu setup (the piece that’s meant to go through your bag loop).
2. Place the keyring into the fabric loop.
3. Make sure the keyring is in front of the Labubu.

That placement helps keep it from drifting or turning.

1. Route the fabric loop through the bag loop.

Then pull the fabric through inside the bag loop and over (you want the loop to sit so it holds tension instead of sliding free).

1. Adjust the hang point so the Labubu sits where you want, and the fabric feels snug.

If it helps, think of the fabric loop as your grip, and the keyring placement as what helps keep Labubu facing correctly.

Keep Labubu from slipping: where to place the ring on the loop

Most slipping happens when the keyring isn’t positioned to create tension, or when it sits too far back so the charm can rotate and loosen itself over time.

Use this checklist:

• Keyring placement: The keyring should be in front of the Labubu. If it’s behind, the charm often swings and starts turning.
• Fabric tension: After you pull the fabric through the bag loop and over, give it a small pull by hand. If it feels loose, re-route so it sits more firmly.
• Loop alignment: Make sure the fabric loop isn’t twisted. A twist gives the charm an “escape path.”
• Don’t rely on one piece: Both the fabric loop and keyring should help together. If one part is doing all the work, it tends to slip faster.

If your goal is “how to stop Labubu from turning,” this section is the base that makes the facing-front trick easier.

Use a clear protective case or decorative clip for extra protection

Once the keyring/fabric loop is secured, an extra layer can help in two ways:

• protecting the charm from scuffs
• reducing movement, so it’s less likely to slide around

Many people use clear protective cases and decorative clips as add-ons.

Here’s how to choose:

Clear protective case (good for reducing wear and snagging)

Pick this if:

• your Labubu rubs against your bag fabric
• you carry it in crowded spaces (subway, school halls, events)
• you want it to look neat

Tip: make sure the case doesn’t block the loop/attachment point. You still need your routing to work properly.

Decorative clip (good for quick adjustments)

Pick this if:

• you swap bags often
• you like being able to remove the charm quickly

Tip: choose a clip that holds firmly and doesn’t slide when you tug gently.

Add extra security: lockable wire keychains and similar options

If your main concern is “prevent getting lost or stolen,” it helps to look at security add-ons, but keep expectations realistic. These are extra protection, not a guarantee.

One common option is lockable wire keychains. The basic idea is that a lockable wire keychain makes it harder for someone to pull your charm off compared to a basic ring.

How to use these safely:

• Attach the lockable wire keychain to the same stable spot you chose earlier (strap, loop, or hardware).
• Keep the metal parts away from thin fabric where they can chew or snag.
• Don’t overload the bag hardware. If it looks strained or bent, switch to a different attachment point.

You can also mix methods, like:

• keyring + fabric loop for the hang
• clear case/clip to reduce movement and protect the charm
• lockable wire keychain for extra grip

How to stop Labubu from turning (hang it to face the front)

Turning usually means the charm is rotating around the anchor point. The fix is to control orientation.

Here’s what to do:

1. Re-check the keyring position: the keyring should be in front of the Labubu.
2. Adjust how it hangs so the front faces outward. If Labubu ends up sideways, there’s room to twist and “walk” around the loop.
3. Use a snug loop route: when you pull the fabric through inside the bag loop and over, make sure it sits evenly and isn’t loose on one side.
4. Try a different attachment point: straps move more than fixed loops. If it’s still turning, anchor it to a more stable spot like a handle loop or buckle area.

A lot of the “right way to hang” advice comes down to this: position the charm correctly, then make the anchor tight enough that it stays that way.

How to attach Labubu to a phone (strap/ring routing basics)

If you’re using Labubu as a phone charm, you’re usually dealing with tighter spaces and less stable anchor points. The goal is the same: keep it from slipping off and help it face the front.

Basic approach:

• Use your existing attachment method (keyring + fabric loop) when possible.
• Route the loop so it has something solid to grip (a case loop, a strap ring, or the phone strap hardware).
• Keep the keyring in front of the Labubu so orientation stays right.

A few practical notes:

• Don’t place it where it presses buttons or covers speaker/mic holes.
• If the phone strap area flexes a lot, your charm may swing and rotate. If that happens, consider a clear protective case or a more secure decorative/locking clip setup.
• Always do a gentle tug test before you walk out the door.

Quick checklist: test tug, check orientation, and re-tighten as needed

After you pick a setup, don’t just glance at it. Do a quick routine:

• Test tug: gently pull the charm side-to-side. It shouldn’t slide freely or rotate in a way that loosens the fabric loop.
• Check facing-front: make sure Labubu is facing the front (the side you want outward).
• Look at the routing: confirm the fabric loop is through the bag loop the way it should be, with the fabric pulled through inside and over.
• Re-tighten if needed: if it feels looser after moving around (walking, sitting, getting in/out of cars), adjust the loop again.

This is the difference between “it looks good for photos” and “it stays secured in real life.”

When to remove Labubu (travel, crowded areas, and storage)

Even a well-secured charm can catch on things at the wrong moment. Taking it off isn’t failure, it’s just smart carrying.

Consider removing it when:

• you’re in crowded areas where it could get bumped, snagged, or twisted
• you’re traveling and your bag is packed tightly (snag risk goes up)
• you’re storing it for a while and want to avoid stressing the fabric loop, clip, or keyring

If you take it off, store it in a way that keeps the loop from getting stretched or twisted. A quick tidy-up now saves you from re-adjusting later.

At the end of the day, choose the method that matches your attachment point, set the keyring so it sits in front of Labubu, and route the fabric loop so it holds tension. Then do a gentle tug test, check that it’s facing the front, and keep the setup that worked best for your bag.