How to Remove Securly

If Securly shows up on your device, it might not be one single thing. It could be an SSL certificate on Android, a browser extension (often on Chromebooks), or school/enterprise control that students aren’t allowed to remove. The fastest way to fix it is to figure out which one you’re dealing with, then follow the right disable/remove steps.

Identify what’s installed: Securly certificate vs extension vs classroom/enterprise lock

Before you start clicking around, take a minute to check what you’re actually seeing.

What it looks like on Android (SSL certificate)

On Android, Securly often shows up as a certificate. A certificate is a trust or verification setting that helps your device decide which websites are “safe” to connect to.

If you’re seeing warnings like “connection not private,” odd certificate messages, or your device looks managed through security settings, you’re likely dealing with the Securly SSL certificate.

What it looks like on Chromebooks (extension)

On Chromebooks, Securly often shows up as a browser extension. An extension is a small browser tool that can filter sites and control access.

If only websites are affected (and not the phone’s or device’s broader “security settings”), you’re probably dealing with the Securly extension.

What it looks like when a school “owns” the device (managed controls)

Sometimes you can’t remove it because your device is managed by your school. In that setup, an admin can set rules that re-install or re-enable Securly even after you try to remove it.

If you try removing something and it comes back, or buttons are greyed out, that’s a strong sign it’s a school policy/enterprise lock.

How to remove Securly SSL certificate on Android (user credentials path)

If you’re trying to remove the Securly certificate on Android, one direct path mentioned in the snippets is through user credentials.

1. Open Settings
2. Tap Security
3. Go to User Credentials
4. Look for the Securly entry
5. Remove/uninstall that entry (if you have the option)

Quick expectation check: if your school or district installed management profiles, you might not be able to remove everything. If you don’t see the Securly entry in User Credentials, then you likely don’t have the certificate version—or it’s being enforced another way.

If you’re trying how do you disable securly? on a Chromebook, start with the simplest idea: check whether it’s acting like a browser extension.

Here’s a practical way to think about it:

• If websites are blocked inside the browser and not across the whole device, it’s likely extension-based.
• If you can’t fully remove it, the school may be reapplying the setting.

What to try first (high level)

Depending on your Chromebook and browser version, you’ll usually be looking in:

• Chrome settings (or browser settings)
• the place where extensions are listed (extension list / installed extensions)

If you can turn off an extension, that may stop it right away. If you can remove it, even better. But if your school manages the Chromebook, removal can be blocked or patched—meaning the device or admin settings bring it back.

Remove Securly extension from Google Admin Console (off-boarding steps)

If you manage devices, this is the most straightforward way to handle it on a school Chromebook. The snippet suggests removing the extension through the Google Admin Console using this path:

• Google Admin Console > Devices > Chrome > Apps & Extensions > Overview

From there, you’d off-board/remove the Securly extension by changing the extension availability settings, or removing it from the configured list for the device/users.

Two key points for expectations:

• Students usually don’t have access to Google Admin Console.
• If a student removes an extension manually but the admin policy still requires it, it can come back.

If you’re a parent or staff member and you’re trying to remove it for good, the Admin Console route is typically the right one.

Why Securly might be blocking everything (common causes to check)

People usually search after running into the most frustrating symptom: “Securly blocking everything.” The exact cause can vary, but these checks help you figure out where to focus.

1) You’re dealing with the wrong component

• Android: you might have a certificate, not an extension.
• Chromebook: you might have a browser extension, not a certificate.

If you remove the wrong thing, the filtering can keep going.

2) The device is managed, so changes don’t stick

If you disable something and it quickly returns, the school policy is often still active. In that case, trying to remove it as a student user may not work.

3) The extension is still active even if you “disabled” it

Sometimes turning something off doesn’t fully remove it. If the extension remains installed and allowed by policy, blocking can continue.

4) You’re seeing effects from the certificate layer (Android)

If the issue shows up at the security or connection level (not just “a website is blocked”), it points back to the certificate side.

If you’re stuck, the best next step is to confirm what you can see:

• On Android: do you see Securly in Settings > Security > User Credentials?
• On Chromebook: do you see Securly listed among extensions?
• If none of that matches: you may be dealing with managed controls.

How to unblock a website on Securly (what to try first)

First, you’ll often find lots of advice online about “getting past” blocks. On managed devices, those tricks usually get patched, and they can put you (or your school account) at risk.

A legitimate unblock approach usually looks like one of these:

Try the simplest legitimate route inside the device/browser

• If Securly is extension-based, check whether there’s a way to request access or see why a site is blocked.
• If your browser shows a block page, look for an option meant for users (for example, a “request review” type message).

If it’s school-managed, ask for a policy change

When Securly is installed through school management, the real control is admin settings. If you can’t remove or disable it yourself, you’ll need IT/admin help to:

• allow that site,
• adjust category blocking,
• or change filtering rules.

If you’re trying to “remove the block” by removing Securly

Unblocking one website and removing the entire filtering system are different tasks. If you remove the whole thing, you could lose other school security controls too. If your school installed it, admins may re-enable it later.

So treat “unblock a website” as a targeted access request, not a full uninstall mission.

How to remove Securly on iPhone (what to look for in settings)

There isn’t one exact user-facing path listed here like we have for Android’s Settings > Security > User Credentials or Chromebook’s Admin Console steps. The goal is still the same: figure out whether Securly is installed as:

• a certificate/profile,
• a browser-related control,
• or a school management setup.

What to check on iPhone

Look for signs that your iPhone is “managed” or has security profiles installed. Common places to check:

• device management / profiles (often under settings related to profiles or device management)
• browser extensions or content settings (if it’s browser-level)
• anything showing a school or organization configuration

If you see a profile installed by your school or organization, removing it may require steps that only admin/IT can approve. Also, if you remove a managed profile, your school may re-enroll it later.

If you want accurate next steps, match what you see on your phone to what you can remove. “Managed by your school” usually means you can’t do everything on your own.

If you can’t remove it: what “managed by your school” typically means

When a device is managed, the school (or district) sets rules that control settings on student devices.

Here’s what that often looks like in real life:

• You can disable something, but it comes back.
• You don’t see the exact menu option to remove it.
• Buttons may be greyed out.
• Admin policies override what you try to change.

On Chromebooks, this often shows up as extensions that re-install or settings that keep getting enforced. On iPhones, it can look like profiles you aren’t supposed to remove.

So if you’re asking how do you disable securly? and the steps you try don’t “stick,” that usually isn’t you doing it wrong. The management layer is doing what it’s set up to do.

Checklist: before you request help from IT/admin

If you need to contact IT or your school admin, you’ll save time if you put together a quick checklist.

Before you message them, gather:

• Device type: Android / iPhone / Chromebook (and whether it’s school-issued)
• What you see: certificate warnings, blocked sites, or a Securly block page
• What component it appears to be:
• Android: can you find Securly in Settings > Security > User Credentials?
• Chromebook: do you see a Securly extension in Chrome extensions?
• iPhone: do you see anything related to device management/profiles?
• What you tried:
• Android: did you check Security > User Credentials?
• Chromebook: did you try disabling/removing in browser settings?
• iPhone: did you check for management/profile settings?
• What you want changed:
• unblock one site (list the URL if you can)
• stop all filtering
• remove Securly entirely (only if your school allows it)

One expectation to keep in mind: if your device is managed, you usually won’t be able to fully remove Securly on your own. The fix often requires an admin update to the policy, such as removing the extension from Google Admin Console > Devices > Chrome > Apps & Extensions > Overview.

If you tell us your device type (Android/iPhone/Chromebook/Edge) and what you see (certificate vs extension), we’ll point you to the most likely removal path.