How Much Does Cyber Security Make an Hour

If you’re asking how much does cyber security make an hour, you’re probably trying to compare job offers in a straightforward way. The catch is that “cyber security” covers different roles, so pay varies by level. It also depends on location and whether the role is contract or full-time. Below are the hourly figures that show up in the SERP-style results, along with the monthly or yearly context they’re paired with.

Hourly pay snapshot: what the top results report

Here are the hourly figures reported in the results:

• Wichita, Kansas (cyber security): $57.19/hour (reported as of October 2026)
• Cybersecurity analyst (U.S. estimate): ~$61.93/hour (noted as about 23% above the national average in the snippet)
• Entry-level cybersecurity analyst: typically $35/hour
• with an hourly range around $32 to $39/hour (on average)
• Cybersecurity & information security analysts (average): $61.41/hour
• this one also comes with an annual figure (more on that below)
• Contract/freelance cybersecurity: $40 to $100/hour (depending on complexity)

Now let’s group those into the “right comparison” buckets, so you’re not mixing different roles.

Cybersecurity/information security analyst hourly pay (average figure from the SERP)

If you’re looking at a more established role like an information security analyst or cybersecurity analyst, the SERP-linked number points to:

• $61.41/hour on average

That same result also pairs hourly pay with annual pay:

• $127,730 per year (paired with the $61.41/hour number)

So if you want one clean “analyst” hourly benchmark from the SERP data, $61.41/hour is the figure that comes with the strongest pay context.

There’s also a separate U.S.-estimate figure for a cybersecurity analyst:

• ~$61.93/hour (described as about 23% above the national average in the snippet)

These two numbers are close, so they likely reflect the same general pay zone for analyst-level work. One is shown with an annual pairing, while the other is described relative to a national average.

Entry-level hourly pay: what the SERP says for entry-level analysts

For entry-level cyber security analyst work, the numbers are lower than the analyst averages above.

What the SERP results report:

• $35/hour as a typical entry-level figure
• A common range around $32 to $39/hour (reported as an average range)

So if you’re setting expectations for an entry-level role, $35/hour (with low-30s to high-30s as the nearby range) is the most directly “entry-level” answer from the SERP data here.

Location example: Wichita, Kansas hourly pay figure from the SERP

Location can change pay even when the job title sounds similar.

One location-based figure in the results is:

• Wichita, Kansas: $57.19/hour for cyber security

(reported as of October 2026)

If you’re comparing offers and one is Wichita-based, this $57.19/hour figure can help you sanity-check the hourly rate being offered.

Contract/freelance hourly pay ranges (complexity-dependent, per the SERP)

Contract and freelance work often follows different pricing than full-time roles. In the SERP results, contract pricing is shown as a wide range:

• $40 to $100/hour for contract/freelance cybersecurity

(the snippet notes it depends on complexity)

The main takeaway is simple: with freelance or contract work, you may see higher hourly rates than typical analyst averages, or you may see lower ones. It depends on what you’re being asked to do and how complex it is.

How to translate hourly pay into monthly and yearly pay (using SERP conversions)

People usually want pay comparisons in more than one format. The SERP data doesn’t provide monthly conversions for every hourly figure shown here, but it does give at least one hourly-to-annual conversion.

Here’s the conversion that clearly connects the units provided:

• $61.41/hour → $127,730 per year (cybersecurity & information security analysts)

So if you’re using that analyst average, you can compare jobs either by hourly rate or by annual pay:

• Hourly: $61.41/hour
• Yearly: $127,730/year

For the other hourly figures (like entry-level $35/hour, Wichita $57.19/hour, or contract $40–$100/hour), the SERP data you were given doesn’t include matching monthly or yearly conversions in the snippets. In that case, the safest approach is to compare hourly to hourly, instead of mixing units that may not use the same conversion method.

Is cyber security high paying? What the SERP numbers imply

You can’t really call something “high paying” based on opinion alone—you need numbers.

From the SERP hourly results:

• Analyst-level average zone: about $61/hour
• $61.41/hour (paired with $127,730/year)
• ~$61.93/hour (U.S. analyst estimate)
• Entry-level: typically $35/hour
• usually $32–$39/hour
• Contract/freelance: $40–$100/hour (complexity dependent)
• Wichita example: $57.19/hour (reported for cyber security)

In other words, pay can look strong once you’re in analyst-level work, especially compared to entry-level. Contract rates can also climb much higher, but they depend heavily on the type of work and how complex it is.

Is cyber security a 9-5 job? What to infer from role/pay reporting

The SERP research here focuses on pay numbers, not schedules. It doesn’t say “always 9–5,” and it doesn’t confirm exact hours.

What you can infer from the way pay is presented:

• When you see contract/freelance hourly pay ($40–$100/hour), that usually points to less predictable scheduling than a full-time salaried role, since contract work is often project-based.
• When you see an average analyst hourly pay tied to annual numbers, it suggests a more traditional job structure, but the snippet still doesn’t confirm a specific schedule.

Based on the data you have here, the honest answer is: you can’t confirm a fixed 9–5 schedule. You can, however, use employment type clues. Contract ranges generally signal more variation.

What is the lowest salary in cyber security? What the SERP hints at

There isn’t one single “lowest salary in cyber security” number in the SERP data you were given.

But there is a useful low-end reference point: entry-level analyst pay.

From the SERP results:

• Entry-level typical: $35/hour
• Entry-level range: $32 to $39/hour (on average)

So, if you’re trying to estimate the low end using only what’s shown here, the low-30s hourly range is the closest thing to a floor in these snippets.

Quick checklist for comparing offers by hourly rate

If you’re comparing two jobs (or comparing a job offer to what you expected from a course), use this checklist so you don’t compare apples to something else:

• Match the role level
• Entry-level vs analyst-level vs contract/freelance can shift hourly pay a lot.
• Keep the unit consistent
• If the offer is hourly, compare it to hourly figures like $35/hour, ~$61/hour, $57.19/hour, or $40–$100/hour (depending on role type).
• Check the location (if it matters to you)
• Example anchor from the SERP: Wichita $57.19/hour (reported October 2026).
• Look for employment type
• Contract/freelance shows the widest range ($40–$100/hour), and complexity affects the rate.
• Use the annual conversion only when it matches the same analyst-average figure
• The SERP ties $61.41/hour to $127,730/year for cybersecurity/information security analysts. If an offer gives a different annual base, don’t force it into the same comparison without matching context.
• Do one fast “sanity check”
• Entry-level tends to land around low-to-mid $30s/hour.
• Analyst averages tend to sit around low-$60s/hour.
• Contract pay can vary widely, sometimes well above those averages.

If you’re comparing roles or offers, use the checklist first, then pick the most comparable number from the list above: hourly for hourly, and the single hourly-to-annual conversion only when it clearly matches the same analyst category shown in the SERP data.